Product Code: VLEL1003

Vectaire Elegance low energy kitchen bathroom extractor fan 4" max 28.5l/s SAP Q

Only £113.50
In Stock Reminder

In Stock Reminder

Please enter your email address to be alerted when this item is back in stock.

Share it

Lowest energy consumption 1.3W in low speed mode which costs around 1.30 based on current electricity prices.

Measures 160mm width x 160mm height x 38mm depth

Spigot size 98mm diameter

Weight 0.9kg

  • SAP Q eligible (dMEV) ultra modern, technically innovative high performance, low noise level fan
  • to exhaust air and fumes directly outside (through wall, or window installation with additional window kit, or with medium length ducting - up to 6m)
  • suitable for any domestic wet room, toilets, shower-rooms, bathrooms, utility rooms and kitchens
  • runs continuously at pre-selectable choice of two lower speeds (fixed at installation)
  • Speed 1 operates at 9.5 l/s (factory set)
  • Speed 2 operates at 13.8 l/s
  • with anti-vibration gasket
  • Incorporated cord which can be removed to allow other types of switching
  • speed boosted to maximum (28.5 l/s) using integral pull cord or by:
    • remote switch/light switch
    • PIR sensor
    • DRH240 (dynamic remote humidistat)
  • the design of the EL1003 allows intake of air around the whole perimeter
  • patented anti-turbulence deflectors ensure very low noise levels and optimum performance
  • energy saving ventilation
  • extremely low running costs
  • low carbon footprint
  • 3 year warranty
  • Vectaire Ltd can supply all accessories for use with these units, including fire dampers, air valves, ducting, outside grilles, wall cowls and window kits. Additionally, Vectaire offers a design service to ensure that the unit installed is the best possible to provide efficient, effective, low energy and low running cost ventilation. Vectaire can also organise installation, commissioning and maintenance of these products


  • shockproof, high quality technopolymer casing
  • designed using latest wind tunnel technology and CFD simulations
  • EC induction motor with thermal protection
  • 30,000 hour life motors with maintenance free and long life ball bearings
  • operates in ambient temperatures up to 40OC
  • double insulated - no earth required
  • IPX4 - Splashproof rated - can safely be installed in Zones I and II


  • Part L1 2010 of Building Regulations for enhanced energy saving capability
  • Part F 2010 of Building Regulations for reliable, efficient ventilation
  • IEC 60335-2-80, BT 2006/95/CE and EMC 2004/108/CE European Directive against radio interference and electro-magnetic compatibility
  • CE marked
  • SAP Q eligible
  • Energy Saving Trust Best Practice Compliant